How to adjust the presser foot pressure on a sewing machine

Article may contain Amazon & affiliate links. As an Amazon Associate I earn from qualifying purchases at no additional cost to you.

Learn how to get the perfect sewing machine presser foot adjustment for different fabric types and avoid problems. Discover how to identify incorrect presser foot pressure, change the tension for optimal sewing results, and improve your sewing machine skills today!

Sewing machine presser foot adjustment

Sewing machine presser foot

Adjusting the pressure on your presser foot is a very important step you might need to take in each and every sewing project. Setting the correct pressure on the presser foot has a big impact on your sewing project and the quality of the end result. This may be the best kept secret of your sewing machine! And in this short but comprehensive tutorial with video instructions, you’ll learn a few simple tips about how to get the perfect sewing machine presser foot adjustment every time!


This tutorial has been converted to a PDF file, available to purchase here. This article is completely free to read.


Every type of fabric needs a different sewing machine presser foot adjustment. And incorrect presser foot pressure can cause serious problems to your sewing machine and fabric! In this tutorial you’ll learn how to get the best sewing machine presser foot adjustment! In addition, you’ll also learn how to identify if your presser foot pressure is not set correctly, and how to change the presser foot tension on a sewing machine according to your project for the best sewing results every time!

Why Adjust Presser Foot Pressure?

The presser foot of a sewing machine is responsible for holding the fabric down while stitching. The proper amount of pressure on the presser foot ensures that the fabric stays in place without puckering or shifting during sewing.

I’ll be referring to Singer sewing machines in this tutorial, since these are the machines I own and worked with. But adjusting presser foot pressure is not only a Singer machines issue, the principle is valid for every sewing machine presser foot.

What is presser foot and presser foot tension?

First a few words about the presser foot and the presser foot pressure (or tension) before proceeding to the actual process of how to adjust the presser foot pressure.

  • The presser foot is the footplate of a sewing machine that holds the fabric down onto the part that feeds it under the needle.
  • The presser foot tension also known as presser foot pressure simply presses on the fabric so the sewing machine’s feed dogs can nicely pull the fabric through.

Presser foot pressure

More tips you might like:

How do you know if the tension in your presser foot is the correct one or you need to exercise some presser foot pressure adjustment? If the presser foot tension is set correctly, your stitches are of the same length and the fabric slides through easily without the need to be pulled, pushed or guided through.

Adjusting presser foot pressure

If there’s too much pressure put down on the presser foot (presser foot too low), your fabric will pucker. Not enough pressure and the presser foot will also make your fabric pucker or your thread gets tangled, in the front or the back of your sewing project.

How to adjust presser foot pressure

Please note before proceeding to make adjustments to the presser foot pressure on your sewing machine: there are various culprits for sewing machine issues, from presser foot tension to bobbin or top tension. These problems can also be related to wrong threading or using the wrong needle or thread type that are not appropriate for your project or even a dirty machine that hasn’t been cleaned and oiled in a long time. In my experience, most common problems are threading or needle related. So please don’t proceed to changing the presser foot tension or any other tension before ruling out all the other issues.  

How to recognize if your presser foot tension is correct or not?

  • If the fabric slips away when the presser foot is down, the pressure is too low and you have to increase the tension.
  • If the fabric doesn’t move and you have to push it to make it slide, you have to lower the tension.
  • When you’re working with more layers and one of them moves faster than the others, the pressure is wrong and needs to be adjusted.
  • When you see skipped stitches or puckered fabric you need to adjust the presser foot pressure: skipped stitches mean the pressure is too low, and puckered fabric means the pressure is too high.

Usually, most sewing machines come with universal pressure setting that is good for most fabrics. So for most projects that use popular fabrics such as cottons, you won’t need to make any adjustment. But from time to time, you’ll want to sew other fabrics and some fabrics will require pressure adjustment and you need to know how to adjust presser foot on sewing machine to match those type of fabrics (like knits or silk for example).

As a rule of thumb, sewing machine presser foot adjustment works like this: to sew heavy fabrics (or sewing through several layers of fabric, like in quilting), you need to have the presser foot set on lighter pressure, while for lighter fabrics you’ll need to set your presser foot tension to a heavier pressure level.

What is the pressure dial on a sewing machine?

Some machines have four to six pressure levels, 1 being the lightest and 4 being the strongest. So, for thick and heavy fabrics, the correct pressure is one; for sewing lightweight fabrics like sheer curtains or chiffon, you have to set it on 3 or 4 (5 or 6 if the dial has more levels).

To make the necessary sewing machine presser foot adjustment you’ll first need to locate the presser foot regulator for your particular sewing machine. This can be a button, a knob, a dial (on some machines this is small, on others the dial is large), a pin that pops up or a screw. This particular machine in the image below features a screw, the white one with a plus and a minus sign on it.

Singer sewing machine presser foot adjustment

These can be found either on top of the sewing machine, directly above the needle and presser foot or on the side, in the same area as your needle and presser foot.

Don’t confuse the presser foot pressure dial with the thread tension dial. The right presser foot pressure will make your fabric slide evenly while stitching, while the correct thread tension will make a nice and smooth stitch without loose or puckering threads. They are both important to make your project look great in the end.

A few related presser foot tension tips to keep in mind

1. Keep in mind that there’s also the possibility that the fabric may not feed properly because of the foot itself. Sticky fabrics like faux leather or vinyl may adhere to the metal foot even if the pressure is right.

  • To avoid this, change to an ultra-glide foot (like a teflon foot), which is made of a special resin and will help the fabric feed correctly.
  • A walking foot can also help you get your fabric running, as it has a set of feed dogs. These, together with the machine’s feed dogs, will have a better grip and will feed the fabric better.

2. When working with very thick fabrics or more layers, a longer stitch length will help increase the feed dogs’ movement and the fabric will feed a lot better.

3. If you are sure all of your tensions are well set and the fabric or thread still pucker, break or are too loose, you may want to check if your sewing machine is clean or oiled properly. Not oiling the mechanisms can affect the quality of your sewing.

5 SECRETS for

sewing better, faster!!

In this special FREE series, you'll learn my most powerful SECRETS that will improve your sewing skills and help you sew like a pro! Join 38,210 sewing enthusiasts like you!

 

Singer sewing machine presser foot adjustment guide

How to Change the Presser Foot Tension on a Sewing Machine

Materials:

  • Sewing machine
  • screw driver (for screws); most machines come equipped with the right tool for that specific type of regulator. Mine comes with a little key you’ll see in the images below.
  • scraps of fabric to test the pressure as you change it

Directions:

  • Locate your presser foot tension regulator
  • If your regulator is a dial, spin it towards the plus sign to tighten the pressure. Spin towards the minus to loosen it.
  • If you have a pin, pressing down the pin will make it pop up and will create a light pressure, needed for heavy fabric. Press down on the pin again to create heavy pressure if you are sewing light fabric.
  • In case you have a knob, it usually comes with an indicator next to it. Pressing up or down the indicator will increase or reduce pressure on your presser foot.
  • If your machine has a screw, use the screwdriver to turn the screw and change the presser foot tension. Turning the screw clockwise or towards a plus sign will create heavy pressure. When turning it counterclockwise or towards the minus sign, it will give you light pressure.

Adjusting The Presser Foot Pressure On A Sewing Machine

This is my screwdriver/key that came with the sewing machine. If you own a Singer, chances are yours looks pretty similar.

How To Change The Presser Foot Pressure On A Sewing Machine

  • Before starting working on a new sewing project, test the pressure foot tension. Sew on a scrap of fabric that is the same thickness as your project. Adjust pressure according to your results. You have the right settings when:
  1.  the fabric doesn’t pucker,
  2. the thread is not tangled,
  3. your stitches are of the same length
  4. and the fabric slides through the feeding dogs smoothly.

And there you have it! Now you know how to make the necessary presser foot pressure adjustments for all your sewing projects. Keep in mind that each fabric requires a different setting, so it’s always a good idea to test on scraps before starting your project. Happy sewing!

Pin to save for later

Photo collage of sewing machine presser foot adjustment dial and the presser foot

5 SECRETS for

sewing better, faster!!

In this special FREE series, you'll learn my most powerful SECRETS that will improve your sewing skills and help you sew like a pro! Join 38,210 sewing enthusiasts like you!

 

Print the craft card

Print Craft Pin Craft Rate this Craft
5 from 1 vote

How to adjust the presser foot pressure

Master the art of sewing machine presser foot adjustment! Avoid issues, identify incorrect pressure, optimize tension, and enhance your sewing skills today!
Prep Time5 minutes
Active Time5 minutes
Total Time10 minutes
Category: Sewing
Region: International
Keyword: how to adjust the presser foot pressure, presser fooot tension, sewing machine presser foot adjustment
Yields: 1 guide
Author: Petro Neagu

Materials

  • scraps of fabric to test the pressure as you change it

Tools

  • screw driver most machines come equipped with the right tool for that specific type of regulator.

Instructions

  • Locate your presser foot tension regulator
  • If your regulator is a dial, spin it towards the plus sign to tighten the pressure. Spin towards the minus to loosen it.
  • If you have a pin, pressing down the pin will make it pop up and will create a light pressure, needed for heavy fabric. Press down on the pin again to create heavy pressure if you are sewing light fabric.
  • In case you have a knob, it usually comes with an indicator next to it. Pressing up or down the indicator will increase or reduce pressure on your presser foot.
  • If your machine has a screw, use the screwdriver to turn the screw and change the presser foot tension. Turning the screw clockwise or towards a plus sign will create heavy pressure. When turning it counterclockwise or towards the minus sign, it will give you light pressure.
  • Before starting working on a new sewing project, test the pressure foot tension. Sew on a scrap of fabric that is the same thickness as your project. Adjust pressure according to your results.
  • You have the right settings when: the fabric doesn't pucker, the thread is not tangled, your stitches are of the same length, and the fabric slides through the feeding dogs smoothly.
Tried this recipe?Mention @easy_peasy_creative_ideas or tag #easy_peasy_creative_ideas!

Most popular sewing projects:

about petro

ABOUT PETRO

Hi, I’m Petro, author and founder of Easy Peasy Creative Ideas. Sewist, crafter, avid DIY-er, foodie, photographer, homemaker and mommy to one. I’m an expert at coming up with quick, clever sewing tips, recycling crafts and simple, easy recipes! You can find my ideas featured in reputable publications such as Country Living, Good House Keeping, Yahoo News, WikiHow, Shutterfly, Parade, Brit & Co and more. Thanks for stopping by and hope you’ll stay for a while, get to know me better and come back another time. Stick around for real fun projects! Read more…

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating




14 Comments

  1. All well and good, if your machine has a foot tensioner, mine does not. Many nowadays do not seem to have. My previous very old machine had one that did not need a screwdriver.

  2. Excellent information Petro as I was unaware of how to adjust pressure tension. Did have lesson when bought my new machine but was this was never discussed even when I asked what this button was for!
    But now I know thank you so much for enlightening me!
    I will be able to make canvas liners for my shopping bags (without pulling my hair out!!!!!)
    Yvonne

    1. Thanks so much for your lovely comment, Yvonne! I’m happy you found my tutorial helpful :)

  3. Elizabeth Raymondi says:

    My pressure foot is stuck in the UP position and will NOT come down after adjusting the whit plastic screw on top of my machine. Any suggestions?
    Liz Raymondi
    Lraymondi@aol.com

    1. Hi Elizabeth. Sounds like the presser foot has some buildup & needs professional cleaning. If you used oil on your presser foot, it turns to gunk with use & the presser foot needs a deep clean.

      1. Kimberly Kelly says:

        does the machine have to have power for the foot to be lowered to the down position? I received a slightly used 5050 Singer model that I had to order a power cord and foot control for and i noticed the lever doesn’t bring the foot down

      2. Kimberly, I don’t have experience with all sewing machines but none of the ones I had needed power in order to move the foot up & down, not even my mom’s 60 yo machine. I would bring it to a repair shop.

      3. Cindy Filoromo says:

        I had the same problem with my Pfaff. I found I’d used the wrong oil. So I got Qtips and wiped it down with alcohol and then Qtips to use the correct oil from Joannes. Works perfect now

  4. Alice Carroll says:

    Thanks for the tips about how to adjust the pressure of a sewing machine that has a screw. I’ve been having a problem figuring out why my sewing machine isn’t working since two days ago and your guide made me discover that my machine’s screw came off and I don’t know where it might have been dropped. I hope a sewing machine service can also provide me with spare parts.

    1. Hi Alice. Glad I could be of help! I’m sure any machine service will be able to replace the screw!

  5. Robin Baker says:

    I’ve been sewing for 45 years and never knew this!! Thanks!

  6. My machine had to be taken apart for a repair. Its back together now but needs adjustment. Should the presser foot when lowered touch the feed dog guide plate or not? Should there be a bit of a gap between the bottom of the foot and the plate? By undoing the screw that holds the presser foot lever the whole shaft can be moved up and down. My machine is an old New Home 609 by Janome. The presser foot tension adjuster works fine but at the moment my presser foot has a slight gap between the foot and the plate and stitching is terrible no matter how much tension is applied. Being of the male gender machinery I know about, sewing I do not. So any help here would be much appreciated.

    1. Hi Tony. The presser feet on all my machines touch the plate when lowered and while I’m not an expert I think this is the way to go. Sometimes when I sew very thick fabric and I lift the foot to the second level I forget to lower to the lowest level and my machine doesn’t like it with the foot lifted. The thread gets tangled and the machine makes a scary noise letting me know instantly something is wrong. So a foot should touch the plate when sewing.

      1. Good information regarding presser foot pressure. It might be worth noting here that not all machines have a presser foot pressure adjustment button, or screw etc. of any kind. Many of the computerized or electronic ones with some computer functions don’t have pressure regulators. And regarding the thread getting tangled when one forgets to completely lower the presser foot, that is usually because the tension disks do not engage (grab the thread) until the presser foot lifter is all the way down.