You’ll love this super easy and quick DIY Charging Station

Article may contain Amazon & affiliate links. As an Amazon Associate I earn from qualifying purchases at no additional cost to you.

Creating your own DIY Phone Charging Station has never been easier  with this simple & quick tutorial! Great recycling project and a lovely gift idea too!

DIY Charging Station

DIY Phone Charging Station

If you’re like me, you probably put your mobile phone to charge anywhere in the house and then completely forget where you put it so you’ll have to call your own number. This DIY phone charging station will basically put an end to that because it’s such an adorable, easy project that can be personalized to any taste using different materials, fabrics or shapes. So you’ll never misplace this cutie!

More recycling projects you will love:

DIY Phone Charging Station

This diy phone charging station is also a great gift idea you can give to friends and family or for holidays. It’s also an awesome way to use up all those shampoo and soap bottles you normally throw once they’re empty. Great project for fabric scraps too if you decide to decorate your stand with fabric. I couldn’t use my scraps this time because the bottle I used has some bumps around the base so the fabric wouldn’t stick properly so I used some ribbon. You could also decorate with washi tape or paint spray it which will make the project even easier!

DIY Phone Charging Station

DIY Phone Charging Station

Thanks to the “built in” hook it will hang on the wall from your charger. I love that this stand will not actually stand on the floor where it may accidentally be knocked down or on a desk where it may add up to the clutter…err, it won’t fit the decor! And of course the cord will be up off the ground, nicely tucked away into the little holder. Awesome craft, very functional, quick and easy!

Get FREE access to my entire resource library!

Signup for updates on new articles, products & special offers and get access to my entire resource library!
 

 

DIY Phone Charging Station

DIY Phone Charging Station

Materials:

  • empty shampoo, lotion or soap plastic bottle
  • marker
  • scissors
  • nail polish
  • cotton pad
  • ribbon
  • sand paper
  • glue

Directions:

  1. Measure your mobile phone against the bottle, to be sure the bottle isn’t too big or too small. Wash the bottle and let it dry
  2. Hold your phone up to the bottle, starting at the bottom and decide how high you want the front of the holder to be. Then make a line with a marker across the front at that point (do not use a permanent marker). Turn the bottle around and continue the line to the back while curving the back upwards.
  3. Cut the bottle with scissors or a box cutter.
  4. Draw a rectangle on the upper back of the bottle large enough to fit your charger.
  5. Sand paper all edges to smooth out and clean the marker off with nail polish. Wrap a piece of ribbon around the bottle, cut to size then glue in place.

And that’s it! Your diy phone charging station is ready to use!

Pin to save for later

DIY charging station

Print the craft card

DIY Phone Charging Station
Print Craft Pin Craft Rate this Craft
No ratings yet

DIY charging station

Creating your own DIY Phone Charging Station has never been easier  with this simple & quick tutorial! Great recycling project and a lovely gift idea too!
Prep Time5 minutes
Active Time5 minutes
Total Time10 minutes
Category: Craft
Region: International
Keyword: diy charging station, diy phone charging station, phone charging station
Yields: 1 station
Author: Petro Neagu

Materials

  • empty shampoo lotion or soap plastic bottle
  • marker
  • nail polish
  • cotton pad
  • ribbon

Tools

  • sand paper
  • scissors
  • glue

Instructions

  • Measure your mobile phone against the bottle, to be sure the bottle isn’t too big or too small. Wash the bottle and let it dry. Hold your phone up to the bottle, starting at the bottom and decide how high you want the front of the holder to be. Then make a line with a marker across the front at that point (do not use a permanent marker).
  • Turn the bottle around and continue the line to the back while curving the back upwards.
  • Cut the bottle with scissors or a box cutter.
  • Draw rectangle on the upper back of the bottle large enough to fit your charger.
  • Sand paper all edges to smooth out and clean the marker off with nail polish. Wrap a piece of ribbon around the bottle, cut to size then glue in place.
Tried this recipe?Mention @easy_peasy_creative_ideas or tag #easy_peasy_creative_ideas!
about petro

ABOUT PETRO

Hi, I’m Petro, author and founder of Easy Peasy Creative Ideas. Sewist, crafter, avid DIY-er, foodie, photographer, homemaker and mommy to one. I’m an expert at coming up with quick, clever sewing tips, recycling crafts and simple, easy recipes! You can find my ideas featured in reputable publications such as Country Living, Good House Keeping, Yahoo News, WikiHow, Shutterfly, Parade, Brit & Co and more. Thanks for stopping by and hope you’ll stay for a while, get to know me better and come back another time. Stick around for real fun projects! Read more…

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating