– Iron on vinyl – Cotton fabric – Cloth
Wash the fabric, dry and press well to remove all wrinkles. Cut the fabric to the size required by your project.
Place the iron-on film on the right side of the cotton fabric, with the matte face up.
Set your iron on the lowest and take the steam function off. Lightly press the iron on the iron on film just until it sets on the fabric then remove the iron.
Cover the iron on with a cloth or another piece of cotton, set the iron to the highest and press again, in small areas, about 8 seconds per area.
Cut the iron on film to size once it’s well settled onto the cotton fabric.
Leave to completely cool before using on a project.