Print the pattern, cut pattern piece b (cuff) and pattern piece a (stocking). Then tape the top and bottom pieces together, overlapping the dashed line and cut. Be advised pattern pieces have 1/4" allowance included so you'll sew all pieces using a 1/4" allowance.
Cut your fabric into two strips and place them right sides together.
Place the long piece of the pattern (the stocking) over the fabrics and hold in place pattern weights.
Using your fabric marker, trace the pattern onto the wrong side of each sock you'll be making.
Add pins at the top, bottom and curlicue toe.
Cut out through both layers of fabric, using fabric scissors and following the traced lines. When done, keep the stockings aside without removing the pins.
Repeat these steps for the crown. You'll need 4 pieces for the crown two for the front and two for the back so you have to do the process twice for the crown.
Cut out each traced cuff piece.
If you want to make the cuff sturdier, fuse fleece to the wrong sides of each piece.
Take the stockings and sew down together around the side seams, the bottom and toe, keeping the top open.
Trim seam allowance by cutting notches out on outside curves, clipping the inside curve and clipping the seam at the toe point. Make sure you don't clip through the stitched lines.
Turn stocking right side out and using a blunt point tool like a pencil or a chopstick, push the curly toe out until nice and sharp.
Press seams well.
Fill the toe with polyfill.
Take one pair of crowns and sew the sides. Keep wrong side out
Take the second pair of crowns and sew the sides. Turn right side out.
Slip the right sided pair inside the wrong sided pair and match seams and crown points.
Pin the crowns together then sew the points with a 1/4" seam allowance.
Clip into the V's of each point on the diagonal and clip the excess fabric at the tip of each point (I'm sorry, I forgot to take complete photos of this step).
Using a blunt tool like a pencil or a chopstick, push the points out until nice and sharp.
Completely turn the entire cuff right side out through the opened top. Press well.
Take the ribbon and cut about 8" for the hook.
Fold the ribbon in half and pin the raw edges to the inside of the stocking, at the back seam, raw edges up.
Edge stitch the ribbon, about 1/8" from the edge. If you feel you need a stronger seam, add a piece of fusible fleece to the fabric before attaching the ribbon.
With both the crown and the stocking right side out, insert cuff inside the stocking through the top open edge of the sock piece, with the points aiming downwards and the cuff facing the wrong side of the sock.
Match the seams and the raw tops, pin and sew with a 1/4" allowance.
Turn cuff to the outside of the stocking (so the right side of the sock faces the right side of the cuff) and press the top seam well.
Optional - edge stitch around the top of the stocking for added detail. Make sure you keep the hanging loop away so you don't sew through it.
If you need to, this is the best time to press the entire piece again, before adding the pom pom.
Hand stitch pom poms to each point of the crown and the curlicue toe.