Cloth or another piece of cotton fabric to use as a top cloth
Instructions
Wash the fabric, dry and press well to remove all wrinkles.
Cut the fabric to the size required by your project.
Make sure you press on a hard surface so if your ironing board is soft, add something hard but heat resistant underneath the cover, like a bamboo cutting board
Place the iron-on film on the right side of the cotton fabric, with the matte face up.
Set your iron on the lowest and take the steam function off.
Lightly press the iron on the iron on film just until it sets on the fabric then remove the iron.
Cover the iron on with a cloth or another piece of cotton, set the iron to the highest and press again, in small areas, about 8 seconds per area.
Cut the iron on film to size once it's well settled onto the cotton fabric.
Leave to completely cool before using on a project.
Don't wash your newly laminated fabric or the end project, just clean with a damp cloth.